无码 人妻系列 在线_人妻被按摩到潮喷中文_亚洲v∧永久无码天堂_亚洲中文字幕二区三区

Chlorinated Polyethylene Resin

As an excellent impact modifier, Keliren? chlorinated polyethylene thermoplastic resin is widely used in PVC extrusion and injection molding products, including profiles, pipes, sheets and fittings. The addition of a small amount of Keliren? resin can greatly enhance the impact resistance of rigid PVC and improve its processing fluidity. In addition, due to its good chemical resistance, outstanding low-temperature performance, high filling capacity, excellent weather resistance and remarkable compatibility, Keliren? resin is used in a wider range of formulation systems.

Application fields

  • CPE is currently the most widely used and most economical impact modifier in the PVC profile industry.

  • Keliren? resin is able to improve the impact resistance and aging properties of PVC pipes significantly. CPE is especially widely used in large-diameter pressure-resistant liquid conveying pipes to improve its pressure bearing performance and extend its service life.

  • When Keliren? resin is blended with PVC to produce soft products, CPE acts as a permanent polymer plasticizer for PVC to avoid the migration of general plasticizers (such as DOP) .

  • Keliren? resin is also used as a modifier and compatibilizer in flame retardant ABS, SAN, HDPE and PP materials to improve their impact resistance and flame retardancy.

  • Keliren? resin is also used in the sole industry due to its good wear resistance and flex resistance.

Modified chlorinated polyethylene (I) Technical indexes

No.

Item

UnitCPE132CCPE1135CCPE135CCPE235CTest method
1Chlorine contentwt%32±135±135±135±1GB/T9872
2Shore hardnessShore A≤60≤57≤57≤60GB/T531
3Tensile strength MPa≥8.0≥8.5≥8.5≥8.5GB/528
4Elongation at break%≥800≥800≥800≥800GB/528
5Application-FR-ABS,Flexible PVC FR-ABS,Flexible PVC PE film   FR-ABS,Flexible PVC PE film  FR-ABS Impact modifier -
6Performance-


Low residual crystalline and good

processing flowability

Low residual crystalline and good 

processing flowability

Low residual crystalline and good 

processing flowability

Moderate residual crystalline, 

can be stored in silo

-

Modified chlorinated polyethylene (II) Technical indexes

No.ItemUnit CPE142CCPE6325CPE3610CPE3605Test method
1Chlorine contentwt%40±136±136±136±1GB/T9872
2Shore hardnessShore A≤65≤60≤60≤60GB/T531
3Tensile strength MPa≥8.0≥8.5≥8.5≥8.5GB/528
4Elongation at break%-≥600≥600≥600GB/528
5Application-

FR-ABS, PE film 

Impact modifier

used in high-speed extrusion PVC products


Impact modifier, used in high-speed  extrusion PVC productsImpact modifier,used in PVC products-
6Performance-Good processing flowability and outstanding flame resistance 

Excellent processing flowability

Much outstanding processing flowability

Good processing flowability and Good impact modification performance

-
Return

Customer message